BPA Free Countertop RO System Purity Water Dispenser
Reverse osmosis system benefits
A reverse osmosis system is one of the most extensive methods of
filtration. It removes 98% of dissolved solids, which makes it
healthier to drink. A water distiller is the only other drinking
water system that also reduces TDS, but it's less efficient than an
RO system.
Harmful dissolved contaminants reduced
Sodium reduced
Bad tastes and odors reduced
More environmentally friendly than bottled water
Easy to install and maintain
Fits under the kitchen sink
Stages of RO systems
The RO membrane is the focal point of a reverse osmosis system, but
an RO system also includes other types of filtration. RO systems
are made up of 3, 4, or 5 stages of filtration.
Every reverse osmosis water system contains a sediment filter and a
carbon filter in addition to the RO membrane. The filters are
called either prefilters or postfilters depending on whether water
passes through them before or after it passes through the membrane.
Each type of system contains one or more of the following filters:
Sediment filter: Reduces particles like dirt, dust, and rust
Carbon filter: Reduces volatile organic compounds (VOCs), chlorine,
and other contaminants that give water a bad taste or odor
Semi-permeable membrane: Removes up to 98% of total dissolved
solids (TDS)
Advantages of BRISKSPRING Countertop RO Water Dispenser
When water first enters an RO system, it goes through
prefiltration. Prefiltration typically includes a carbon filter and
a sediment filter to remove sediment and chlorine that could clog
or damage the RO membrane.
Next, water goes through the reverse osmosis membrane where
dissolved particles, even too small to be seen with an electron
microscope, are removed.
After filtration, water flows to the storage tank, where it is held
until needed. A reverse osmosis system continues to filter water
until the storage tank is full and then shuts off.
Once you turn on your drinking water faucet, water comes out of the
storage tank through another postfilter to polish drinking water
before it gets to your faucet.
- Simple to Replace Filters
The service life of the filter in the countertop water dispenser
can be up to 18 months.
It is designed with intelligent filter life reminder.
Besides, with self-service filter replacement design, the filter
can be easily replaced by spinning and lifting.
The countertop reverse osmosis system reduces wastage with its
impressive 2:1 drain ratio and drain water recycling technology,
so don't waste much water.
- Intelligent Screen Off for Power Saving
If the countertop water filtration system is not operated for 20s,
the screen will be off and enter a power-saving mode,
thereby reducing service power and saving electric charge. It runs
as quietly as 40 dB, giving you more silent use experience.
- Drill free
- Portable everywhere
- Long lifespan
- Keep water flowing out continuously
Specifications of BRISKSPRING Countertop RO Water Dispenser
| Product name | Countertop Reverse Osmosis Water Dispenser |
| Product type | JBBD - L1JL15 - 06 - BS |
| Rated clean water flow | 0.4L/min 0.26L/min |
| Rated total net water volume | 4000L 2000L |
| Function type | Cold boiled water |
| Rated voltage/frequency | 220V~/50Hz |
| Total rated power | 2200W |
| Hot water capacity | 20L/H,≥90°C |
| Applicable water source | Municipal tap water |
| Applicable water temperature | 5-38℃ |
| Ambient temperature | 4℃～40℃ |
| Product size | 230.8*420*375mm(Width*Depth*Height) |
| Effluent quality | In line with the Standards for Hygienic Safety and Functional
Evaluation of Drinking Water Quality Processors - Reverse Osmosis
Treatment Device |
FAQ:
Q1: Are you a manufacturer?
A: Yes. We are a top manufacturer of water filters in China and an
industry leader and standard drafting units. For the water
prefilters, we have already developed over ten generations of
different types of washing modes for the filters.
Q2: Can we use our logo/brand?
A. Yes, we already do OEM and ODM with famous brands like
Honeywell, Pentair, Vaillant, and many other first-tier brands in
the world.
Q3: Can you offer a sample to check the quantity?
A: Yes. We offer agent prices for samples.
Q4: What's the order delivery time?
A: Our production capacity is 1500000 units per month, and the Lead
time is according to the order quantity, order models, and packing.
Generally, it takes about 7-25 days.
Q5: Why should I choose BRISKSPRING?
A: 1) We have full production chains, from industrial design, to
mold, plastic injection, and copper parts. Every part of your
filters and the copper parts are made by ourselves. The product
quality and cost are under control.
2) Most filters have international certifications such as NSF, SGS,
and RoHS.
